- New
Search here...
Cart
0
$0.00
Complete PRO Substance Identification Test Kit 100+ Tests
Last price of 30 days: 0,00
$63.90
Tax included
In our offer we present the Full PRO Substance Identification Test – a complete set of chemical reagents for the preliminary analysis of powders, crystals, tablets, plant material and blotters. The kit makes it possible to check over 800 different substances, detect potentially dangerous adulterants and confirm the presence of psychoactive compounds before further laboratory analysis.
In Stock
Full PRO Substance Identification Test
The kit contains eleven colorimetric reagents, each of which reacts differently with various chemical groups: phenethylamines, tryptamines, ketamine, cathinones, opioids, cannabinoids and many others. Each reagent changes colour on contact with the sample, which allows the preliminary identification of the type of compound and the detection of adulterants such as NBOMe, PMA/PMMA, U-4700, synthetic benzodiazepines or eutylone. The kit is intended for fast, preliminary qualitative analysis, and its regular use significantly increases safety.
Analysis
Allows you to assess the colour reaction of over 800 substances in contact with the appropriate reagents.
Safety
Enables the detection of particularly dangerous contaminants, including NBOMe, PMA/PMMA, fake MDMA and synthetic opioids.
Speed
The colour reaction usually appears within 5–30 seconds, and the full result can be read within 3 minutes.
Step-by-step instructions
01
Gather the tools
The manufacturer recommends preparing a clean ceramic or glass surface, a spatula, reagents and a paper towel.
02
Prepare the sample
The manufacturer recommends crushing a small amount of material into a fine powder. For blotters – cut off a corner. For liquids – dry a drop on the surface.
03
Add the reagent
The manufacturer recommends: shake the bottle before use. Use 1 drop to completely cover the sample. Do not mix reagents unless the instructions state otherwise (e.g. Morris A+B).
04
Observe the result
The reaction lasts up to 3 minutes. The colour changes fastest where the reagent touches the sample. Take a photo for comparison.
05
Compare the colours
The manufacturer recommends comparing the obtained colour with the reaction chart for the given reagent. The kit can indicate the PRESENCE, but not the quantity of a substance.
Interpretation of results
-
Colour change
Indicates a chemical reaction characteristic of a given group of substances. The result should always be verified with several reagents.
-
No colour change
Lack of reaction may mean that the sample does not contain the tested substance or is too diluted. The result never confirms that the sample is safe.
-
Atypical reaction
Unexpected colours may indicate the presence of adulterants, degradation of the reagent or a substance outside the test range.
FREQUENTLY ASKED QUESTIONS
What is the Full PRO Substance Identification Test used for? +-
- The kit enables the preliminary identification of over 800 substances and the detection of dangerous adulterants by using eleven reagents with different reaction profiles.
What is included in the kit? +-
- The kit contains 11 reagents (Cannabis, Ehrlich, Hofmann, Froehde, Marquis, Mecke, Morris, Liebermann, Robadope, Zimmermann, Beam), a porcelain plate, a micro spatula and the manufacturer’s instructions.
How do the individual reagents work? +-
- Each reagent shows a characteristic colour reaction with different chemical groups, which makes it possible to confirm or rule out the presence of THC, LSD, MDMA, ketamine, opioids, cathinones, tryptamines and other substances.
How to use the reagents safely? +-
- The manufacturer recommends working in a well-ventilated area, using gloves and goggles and storing the reagents tightly closed, away from light and heat.
How should the kit be stored so that the reagents work properly? +-
- The manufacturer recommends storage in a cool, shaded place. Reagents may degrade when exposed to air – before use it is advisable to check their performance on a control sample.
Test kit / chemical reagent intended solely for laboratory research and testing to qualitatively check for the presence of substances in samples. The product is not intended for consumption or application on human or animal bodies.
The test does not serve to assess the safety of consuming any psychoactive substances or for making health decisions. The result is indicative and does not replace specialized laboratory tests, medical consultation, or expert opinion.
Do not use the product for purposes other than research. Use only in accordance with the instructions, using appropriate personal protective equipment. Avoid contact of the reagent with skin, eyes, and clothing. The manufacturer and distributor are not liable for consequences resulting from improper use.
Product available exclusively to adults. Store out of reach of children and animals, in the original, tightly closed packaging.
Batch number and expiry date: found on the packaging.
Calculator for measuring research doses
Tip: 1 MG = 1000 MCG
Related Products ( 13 other products in the same category )
